Mesh based on carbon fiber for structural reinforcement

TEJIAIS CARBONO

¡Compártelo o guárdalo!

TEJIAIS CARBONO , MESH BASED ON CARBON FIBER FOR STRUCTURAL REINFORCEMENT

TEJIAIS CARBONO

MESH BASED ON CARBON FIBER FOR STRUCTURAL REINFORCEMENT

COMPRAR Ficha Técnica

Description Mesh based on carbon fiber for structural reinforcement, TEJIAIS CARBONO ?

Tissue based on carbon fiber that is used for mechanical strengthning structures. TEJIAIS CARBONO is joining to the support by EPOAIS CARBONO.

Aplication Mesh based on carbon fiber for structural reinforcement?

Structural reinforcement based on TEJIAIS CARBONO that is used to reinforce structures that require: to increase reinforced capacity, repair damage, prevent any damage that can arise from seismis movements and changes that may take place in the building structure.

Features and Benefits de TEJIAIS CARBONO , Mesh based on carbon fiber for structural reinforcement

  •  INCREASED REINFORCEMENT
  •   EASY APPLICATION OF THE PIECES
  •  THIN LAYER
  •  HIGH RESISTANCE.
 COMPRAR

¡Compártelo o guárdalo!

Surface preparation

The background of application of this system must be dry, firm, free of dust and loose particles. Concrete requires a minimum curing time of 28 days.

Modes of application Mesh based on carbon fiber for structural reinforcement?

 Preparation of the background: - Clean the support mechanically by sandblasting or sanding, cleaning so as to eliminate any trace of dust, loose particles or releasing agents, or any other element that may prevent proper adherence. - The minimum ageing period of concrete will be 28 days (less than 4% of humidity). - Cohesion of the support measured by its resistance to tearing will be more than or equal to 1 N/mm2. - The corners of the structures must be rounded in a radius of at least 10 mm. - The maximum temperature of service will be 50ºC. - For installation, the required temperature of the support is 3ºC above dew temperature. Mixing of the adhesive: - Mix the two components with the adhesive. - Apply the adhesive onto the support with a paint brush or brush according to the surface of application. - Place TEJIAIS CARBONO on the fresh adhesive(with the fibres placed in the right direction), preventing the formation of occluded air. - If more than one layer of TEJIAIS CARBONO is required, an additional layer of resin is first applied followed by three layers of TEJIAIS CARBONO maximum. - In order to finish, apply one layer of TEJIAIS CARBONO and add ARCUAIS 1.2-1.5 provides anchoring for the application of cement based renders. - When overlapping with the fibres following the same direction, the fibres overlap in a thickness of at least 10 cm.

Clean up

Clean tools using DISOLVENTE EPOXI solvent.

Performance Mesh based on carbon fiber for structural reinforcement

According to the application.

Storage Mesh based on carbon fiber for structural reinforcement

Unlimited time for storage.

Documentation Mesh based on carbon fiber for structural reinforcement

Productos relacionadas

TEJIAIS

MINERAL FIBRE FABRIC FOR REINFORCING

OTRAS VARIANTES

COMPRARMÁS INFO
+34 981 602 111
¿Tienes dudas?
Llámanos
MÁXIMA CALIDAD.
En materias primas
y construcción.
logo de teais, empresa de materiales de construcción
Avda. da Enerxía, nº 153, Pol. Ind. de Sabón
15143 Arteixo,A Coruña
Phone.: 981 602 111
Fax.: 981 601 508
Email.: desarrollo@teais.es

síguenos en:

Política de cookies | Aviso Legal | Política de privacidad

FEDER INNTERCONECTA

2015-2017 SHIAC (ITC-20151250): DESARROLLO DE TECNOLOGÍAS DE HIGIENIZACIÓN PARA LA REDUCCIÓN DE RIESGOS BIOLÓGICOS EN ACUICULTURA
El proyecto SHIAC tiene como objetivo principal la investigación y desarrollo de una estrategia integral que permita reducir el riesgo biológico en acuicultura, integrando diferentes medidas tanto de tipo activo como pasivo para la prevención de patologías con una gran incidencia económica en el sector, y aportando soluciones más sostenibles ambientalmente a las actualmente empleadas en acuicultura.
Grupo Tres Mares S.A actúa como socio representante del consorcio empresarial que ejecuta este proyecto el cual ha sido aprobado y subvencionado por CDTI en el marco de la convocatoria FEDER INNTERCONECTA 2015.