Putty for filling and repairing for outdoor.

TEAIS PLASTOCEM

¡Compártelo o guárdalo!

TEAIS PLASTOCEM , PUTTY FOR FILLING AND REPAIRING FOR OUTDOOR.

TEAIS PLASTOCEM

PUTTY FOR FILLING AND REPAIRING FOR OUTDOOR.

Description Putty for filling and repairing for outdoor., TEAIS PLASTOCEM ?

Mortar for filling, smoothing and repairing for prepairing supports to be painted. It is applied on supports with or without paint. It is a product with high adherence and fast hardening.

Aplication Putty for filling and repairing for outdoor.?

The product is applied to prepare external wall for further painting and re-painting.

Features and Benefits de TEAIS PLASTOCEM , Putty for filling and repairing for outdoor.

  •  HIGH ADHERENCE
  •   FAST DRY
  •   HIGH HARDENING
  •   NEW BUILDING AND RE-PAINTING

¡Compártelo o guárdalo!

Surface preparation

The support must be clean and dry, free of dust and loose particles, firm and with good cohesion.

Modes of application Putty for filling and repairing for outdoor.?

  TEAIS PLASTOCEM is mixed with water in doughy consistency. - Apply by stailess stell or plastic trowel or spatula. - Don´t apply on polystirene or wet supports. - Don´t apply under direct sunlight or hot surfaces. - Don´t apply with temperatures below 5ºC or over 35ºC. - Don´t re-mix the dough once it begins to harden.

Clean up

Tools must be clean with water while the material is wet.

Performance Putty for filling and repairing for outdoor.

1,2 kg/sqm per each 1 mm of thickness.

Storage Putty for filling and repairing for outdoor.

Two years in their original packages, protected from the weather and stored in cool and dry place.

Documentation Putty for filling and repairing for outdoor.

Productos relacionadas

MÃXIMA CALIDAD.
En materias primas
y construcción.
FEDER INNTERCONECTA

2015-2017 SHIAC (ITC-20151250): DESARROLLO DE TECNOLOGÃAS DE HIGIENIZACIÓN PARA LA REDUCCIÓN DE RIESGOS BIOLÓGICOS EN ACUICULTURA
El proyecto SHIAC tiene como objetivo principal la investigación y desarrollo de una estrategia integral que permita reducir el riesgo biológico en acuicultura, integrando diferentes medidas tanto de tipo activo como pasivo para la prevención de patologías con una gran incidencia económica en el sector, y aportando soluciones más sostenibles ambientalmente a las actualmente empleadas en acuicultura.
Grupo Tres Mares S.A actúa como socio representante del consorcio empresarial que ejecuta este proyecto el cual ha sido aprobado y subvencionado por CDTI en el marco de la convocatoria FEDER INNTERCONECTA 2015.