Self-protected elastomeric membrane with mineral grinder for waterproofing

CUBRETAIS ROLLO

¡Compártelo o guárdalo!

CUBRETAIS ROLLO, SELF-PROTECTED ELASTOMERIC MEMBRANE WITH MINERAL GRINDER FOR WATERPROOFING

CUBRETAIS ROLLO

SELF-PROTECTED ELASTOMERIC MEMBRANE WITH MINERAL GRINDER FOR WATERPROOFING

COMPRAR Ficha Técnica

OTRAS VARIANTES DE CUBRETAIS :

STANDARD

ANTIRRAICES

Description Self-protected elastomeric membrane with mineral grinder for waterproofing, CUBRETAIS ROLLO?

Self-protected asphalt surface plate based on colored mineral granules. It is supplied in imitation of standard and roll slabs. It is an ideal product to waterproof any type of non-walkable deck. Stays stable before the action of atmospheric agents. Colors: Standard plates = Red, Black. Roll = Red, green, gray. Prices according to color.

Aplication Self-protected elastomeric membrane with mineral grinder for waterproofing?

CUBRETAIS ROLLO, is a product made of a membrane of asphaltic bitumen modified with a SBS elastomer, of self-protected surface area with colored inorganic aggregates, reinforced with a polyester film and fiberglass, thus forming three bituminous covering layer and finalizing with plastic of As an anti-adhesive material.

Features and Benefits de CUBRETAIS ROLLO, Self-protected elastomeric membrane with mineral grinder for waterproofing

  •   EXCELLENT QUALITY
  •   VERY GOOD AESTHETIC PROPERTIES
  •   FOR VISIBLE WATERPROOFING
 COMPRAR

¡Compártelo o guárdalo!

Surface preparation

Must be clean, free from grease, oils, dust and loose particles, which will make the membrane

Modes of application Self-protected elastomeric membrane with mineral grinder for waterproofing?

  On slopes between 15% and 25%, first apply waterproofing with TELA ELASTOMÉRICA "4".
 SUPPORT: Applies to continuous surfaces that can be formed by: Wood: must be sound and dry and previously treated (a layer of last in). Panels: can be placed on different types of panels such as plywood, ceramic, cement, etc. Concrete: on sloped tiles, on the compression layer of the concrete ensure to realize a screed of 1,5cm to 2cm of thickness to support the application. PLACEMENT: When the slope of the skirt and greater than 10% it is advisable to place the sheets in a direction parallel to the line of maximum slope. If the slope is more than 15% mechanically fix the sheets, to avoid any detachment. You must start at the bottom of the slope by going up to the end, make sure to straddle the leaves on 8 cm as minimum in the unions. Continue placing the sheets parallel with respect to the overlap at each row. The sheets should extend over LASTOIS IN, avoiding the formation of air pockets, by welding the asphalt paint and the sheets together. By strong inclination fix mechanically. If the shape of the roof allows it fold the leaves on the ridge overlapping by 30 to 40 cm. In the meeting points with fireplaces etc., applied Lastois IN to ensure the perfect fixation Elongation and elastic recovery: 90% minimum
 Ash content: 25% maximum Heating loss (163 ° C, 5hs): 0.1% maximum

Clean up

Not applicable

Performance Self-protected elastomeric membrane with mineral grinder for waterproofing

1,12 sqm/sqm

Storage Self-protected elastomeric membrane with mineral grinder for waterproofing

Unlimited in a dry and cool place. Do not store at high temperatures.

Documentation Self-protected elastomeric membrane with mineral grinder for waterproofing

Productos relacionadas

LAMINA IMPERMEABLE AUTOADHESIVA,

LAMINA IMPERMEABLE AUTOADHESIVA

MÁS INFO

TELA ALUMINIO

OTRAS VARIANTES

MÁS INFO

TELA ASFALTICA

OTRAS VARIANTES

MÁS INFO

TELA ELASTOMERICA

OTRAS VARIANTES

MÁS INFO
+34 981 602 111
¿Tienes dudas?
Llámanos
MÁXIMA CALIDAD.
En materias primas
y construcción.
logo de teais, empresa de materiales de construcción
Avda. da Enerxía, nº 153, Pol. Ind. de Sabón
15143 Arteixo,A Coruña
Phone.: 981 602 111
Fax.: 981 601 508
Email.: desarrollo@teais.es

síguenos en:

Política de cookies | Aviso Legal | Política de privacidad

FEDER INNTERCONECTA

2015-2017 SHIAC (ITC-20151250): DESARROLLO DE TECNOLOGÍAS DE HIGIENIZACIÓN PARA LA REDUCCIÓN DE RIESGOS BIOLÓGICOS EN ACUICULTURA
El proyecto SHIAC tiene como objetivo principal la investigación y desarrollo de una estrategia integral que permita reducir el riesgo biológico en acuicultura, integrando diferentes medidas tanto de tipo activo como pasivo para la prevención de patologías con una gran incidencia económica en el sector, y aportando soluciones más sostenibles ambientalmente a las actualmente empleadas en acuicultura.
Grupo Tres Mares S.A actúa como socio representante del consorcio empresarial que ejecuta este proyecto el cual ha sido aprobado y subvencionado por CDTI en el marco de la convocatoria FEDER INNTERCONECTA 2015.