Curing lacquer for mortars and concretes

LACURIS A

¡Compártelo o guárdalo!

LACURIS A , CURING LACQUER FOR MORTARS AND CONCRETES

LACURIS A

CURING LACQUER FOR MORTARS AND CONCRETES

Description Curing lacquer for mortars and concretes, LACURIS A ?

Transparent liquid based on parafins emulsion for working as protection membrane of cement curing on concretes and wet mortars.

Aplication Curing lacquer for mortars and concretes?

Its application to newly laid concrete floors, forms a film that prevents premature loss of water. Without altering the setting time. As protector for curing fresh cement and mortar. Improves physical resistances.

Features and Benefits de LACURIS A , Curing lacquer for mortars and concretes

  •   DOES NOT CHANGES THE SETTING TIME
  •   IMPROVES MECHANICAL STRENGTH
  •   DECREASES RETRACTION
  •   REDUCES DUST FORMING
  •   INCREASES FROST RESISTANCE
 COMPRAR

¡Compártelo o guárdalo!

Surface preparation

Not applicable.

Modes of application Curing lacquer for mortars and concretes?

  Mix the content of the package before so as to make it uniform. - Apply directly onto the mortar or concrete with a spray. - It is recommended to apply in two continuous coatings. Application is only possible once it is observed that the surfaces of application become matt. - Surfaces to be finished with mortar or paint must not be treated with LACURIS A or proceed to sanding the surface to ensure proper adhesion.

Clean up

Clean tools and spray equipment with Disolvente de Limpieza immediately after using.

Performance Curing lacquer for mortars and concretes

8 sqm per l (min).

Storage Curing lacquer for mortars and concretes

2 years in their original packagings, properly closed and at moderated temperatures, stored in a dry and cool place.

Documentation Curing lacquer for mortars and concretes

MÁXIMA CALIDAD.
En materias primas
y construcción.
FEDER INNTERCONECTA

2015-2017 SHIAC (ITC-20151250): DESARROLLO DE TECNOLOGÍAS DE HIGIENIZACIÓN PARA LA REDUCCIÓN DE RIESGOS BIOLÓGICOS EN ACUICULTURA
El proyecto SHIAC tiene como objetivo principal la investigación y desarrollo de una estrategia integral que permita reducir el riesgo biológico en acuicultura, integrando diferentes medidas tanto de tipo activo como pasivo para la prevención de patologías con una gran incidencia económica en el sector, y aportando soluciones más sostenibles ambientalmente a las actualmente empleadas en acuicultura.
Grupo Tres Mares S.A actúa como socio representante del consorcio empresarial que ejecuta este proyecto el cual ha sido aprobado y subvencionado por CDTI en el marco de la convocatoria FEDER INNTERCONECTA 2015.