Hardener of natural and artificial stone and other porours supports

ENDUPIS

¡Compártelo o guárdalo!

ENDUPIS , HARDENER OF NATURAL AND ARTIFICIAL STONE AND OTHER POROURS SUPPORTS

ENDUPIS

HARDENER OF NATURAL AND ARTIFICIAL STONE AND OTHER POROURS SUPPORTS

COMPRAR Ficha Técnica

Description Hardener of natural and artificial stone and other porours supports, ENDUPIS ?

Hardener of stone, slate, granite, etc. Can be applied by brush or sprayer in one or more layers. The surfaces to treat on must be cleaned up. If there is moss or other microorganism on the surface to clean the use of LIPIS is recommended to remove it.

Aplication Hardener of natural and artificial stone and other porours supports?

For the consolidation treatment of stony materials. Refurbishment on older buildings made of stone. Refurbishment of decks made of slate. Treatment of stony materials to achieve a longer duration. Hardening of cement-lime- based renders with low hardening level. Improves the mechanical resistance of the materials both compression and traction. Increases the resistance to the alteration process. For outdoor and indoor.

Features and Benefits de ENDUPIS , Hardener of natural and artificial stone and other porours supports

  •   HIGH CAPACITY OF PENETRATION
  •   MIERALIZING
  •   RESTORER OF HARDENIGN
  •   PENETRATION POWER UNTIL 10 CM
  •   PERMEABLE TO WATER VAPOUR
 COMPRAR

¡Compártelo o guárdalo!

Surface preparation

The surface must be cleaned, free of greases, oils, dust and loose particles and properly cleaning up. In the case of having moss or microorganism is recommended a previous cleaning with LIPIS.

Modes of application Hardener of natural and artificial stone and other porours supports?

  Stir the content of the package. to homogenize well. - Mix the components. - It must be applied on the cleaned and dry support. For this is necessary to remove the dirty with a special cleaning agent such as LIPIS and clean with pressurized water. A long dry-time (one week minimum) is required after the cleaning.
  ENDUPIS application is done by brust or sprayer on the surface to treat. One or more layers can be applied according with the absorption. If a second layer is required it must be applied over the first one still wet when is been completely absorbed. - Once the support is dry it can be waterproofed by REPAIS. - A previous test is necessary in order to check both how much hardener is required and if the application doesn´t produce alterations.
  Also can be applyed by injection in wall partitions to reduce the rising-damp. The injection must be done drilling the stone until the center of the wall with six holes per lineal meter. - It must be applied neither with temperatures below of 5ºC nor up of 3,0ºC. Don´t apply with rain forecast, freezes or strong winds or with adverse weather conditions.

Clean up

With plenty of clean water just after using.

Performance Hardener of natural and artificial stone and other porours supports

8 sqm per litre on low porosity supports.

Storage Hardener of natural and artificial stone and other porours supports

1 year in their original packages, tightly closed, protected from the weather and in cool and dry places.

Documentation Hardener of natural and artificial stone and other porours supports

Productos relacionadas

FIJALIN,

FIJALIN

COMPRARMÁS INFO
SELLADOR ADOBE, SEALANT AND HARDENER FOR ADOBE SURFACES.

SELLADOR ADOBE

SEALANT AND HARDENER FOR ADOBE SURFACES.

COMPRARMÁS INFO
+34 981 602 111
¿Tienes dudas?
Llámanos
MÁXIMA CALIDAD.
En materias primas
y construcción.
logo de teais, empresa de materiales de construcción
Avda. da Enerxía, nº 153, Pol. Ind. de Sabón
15143 Arteixo,A Coruña
Phone.: 981 602 111
Fax.: 981 601 508
Email.: desarrollo@teais.es

síguenos en:

Política de cookies | Aviso Legal | Política de privacidad

FEDER INNTERCONECTA

2015-2017 SHIAC (ITC-20151250): DESARROLLO DE TECNOLOGÍAS DE HIGIENIZACIÓN PARA LA REDUCCIÓN DE RIESGOS BIOLÓGICOS EN ACUICULTURA
El proyecto SHIAC tiene como objetivo principal la investigación y desarrollo de una estrategia integral que permita reducir el riesgo biológico en acuicultura, integrando diferentes medidas tanto de tipo activo como pasivo para la prevención de patologías con una gran incidencia económica en el sector, y aportando soluciones más sostenibles ambientalmente a las actualmente empleadas en acuicultura.
Grupo Tres Mares S.A actúa como socio representante del consorcio empresarial que ejecuta este proyecto el cual ha sido aprobado y subvencionado por CDTI en el marco de la convocatoria FEDER INNTERCONECTA 2015.