Filling paste and thixotropic epoxy adhesive for wood.

MADEPOIS PASTA

¡Compártelo o guárdalo!

MADEPOIS PASTA , FILLING PASTE AND THIXOTROPIC EPOXY ADHESIVE FOR WOOD.

MADEPOIS PASTA

FILLING PASTE AND THIXOTROPIC EPOXY ADHESIVE FOR WOOD.

COMPRAR Ficha Técnica

Description Filling paste and thixotropic epoxy adhesive for wood., MADEPOIS PASTA ?

Two-component pasty epoxy adhesive. Two components must be mixed just in the moment of using to join pieces of wood or wood with other materials such as concrete, stone, etc. The admixture has a applying time of 20 minutes.

Aplication Filling paste and thixotropic epoxy adhesive for wood.?

As an hihg power adhesive for joining pieces of wood, wood with concrete, wood with stone, etc. In works of reparation and refurbishment of wood such as beams and pillars.

Features and Benefits de MADEPOIS PASTA , Filling paste and thixotropic epoxy adhesive for wood.

  •   HIGH ADHERENCE
  •   FOR FILLING HOLES
  •   HIGH MECHANICAL RESISTANCE
  •   VERY SUITABLE FOR WORKS OF REFURBISHMENT OF BEAMS AND PILLARS
 COMPRAR

¡Compártelo o guárdalo!

Surface preparation

The support must be quite clean, free of greases, oils, loose parts and without standing water. It is recommendable to prepare the surface mechanically by projecting abrasive agents until achieve a cleaned up surface.

Modes of application Filling paste and thixotropic epoxy adhesive for wood.?

  Remove separately the content of both packages to homogenize them before mixing. - Mix manually or by a low revolution electric mixer (300-500 rpm) the whole content of the packages. - It must be applied by spatula or proper tool.
  Spread abundantly (specially if the support is slightly wet) the surfaces to be joined pressing them evenly until achive a perfect joint between elements. - Is suitable to keep pressing the pieces during the first 12 hours. - The admixture proportion is 60A:40B (kits of 6,5 kg: 3,9 A- 2,6 B) (kits of 1,25 kgs: 0,75 A- 0,5 B).
  Apply the admixture before an hour +/- minutes (workable open time).
  The support must have a temperature over 10ºC.
  The higher temperature the lower useful life of the admixture and open time. It is recommended to work with temperatures between 15ºC and 20ºC.
  Don´t apply in layer bigger than 5 cm. If the application of layers thicker than 5 cm is required the application must done in several layers in order to let them dry for 12 hours between each one before applying the next one. - High resistant tocompression, traction and flexotraction. - Resistant to chemical products and internal dapmness. - It neither has retraction nor corrosive action. - High hardness and adherence on dry and slightly wet surfaces. - Rootproof and waterproof.
  When a formwork is used, polyethylene must be used as a separator agent to avoid sticking to formwork.

Clean up

With TEAIS EPOXY SOLVENT.

Performance Filling paste and thixotropic epoxy adhesive for wood.

According to use.

Storage Filling paste and thixotropic epoxy adhesive for wood.

Store in dry and cool place in their original packages avoiding extrem temperatures, for a year maximum.

Documentation Filling paste and thixotropic epoxy adhesive for wood.

Productos relacionadas

MADEPOIS LIQUIDO, FILLING PASTE AND ADHESIVE FOR WOOD.

MADEPOIS LIQUIDO

FILLING PASTE AND ADHESIVE FOR WOOD.

COMPRARMÁS INFO
+34 981 602 111
¿Tienes dudas?
Llámanos
MÁXIMA CALIDAD.
En materias primas
y construcción.
logo de teais, empresa de materiales de construcción
Avda. da Enerxía, nº 153, Pol. Ind. de Sabón
15143 Arteixo,A Coruña
Phone.: 981 602 111
Fax.: 981 601 508
Email.: desarrollo@teais.es

síguenos en:

Política de cookies | Aviso Legal | Política de privacidad

FEDER INNTERCONECTA

2015-2017 SHIAC (ITC-20151250): DESARROLLO DE TECNOLOGÍAS DE HIGIENIZACIÓN PARA LA REDUCCIÓN DE RIESGOS BIOLÓGICOS EN ACUICULTURA
El proyecto SHIAC tiene como objetivo principal la investigación y desarrollo de una estrategia integral que permita reducir el riesgo biológico en acuicultura, integrando diferentes medidas tanto de tipo activo como pasivo para la prevención de patologías con una gran incidencia económica en el sector, y aportando soluciones más sostenibles ambientalmente a las actualmente empleadas en acuicultura.
Grupo Tres Mares S.A actúa como socio representante del consorcio empresarial que ejecuta este proyecto el cual ha sido aprobado y subvencionado por CDTI en el marco de la convocatoria FEDER INNTERCONECTA 2015.