Elastomer putty with high adherence and elasticity

LASTOIS 10

¡Compártelo o guárdalo!

LASTOIS 10 , ELASTOMER PUTTY WITH HIGH ADHERENCE AND ELASTICITY

LASTOIS 10

ELASTOMER PUTTY WITH HIGH ADHERENCE AND ELASTICITY

Description Elastomer putty with high adherence and elasticity, LASTOIS 10 ?

Elastomeric putty with high adherence and elasticity for filling joints, carpentry, smaill cracks, etc It can be painted on once dry. It has anticorrosive and antimoss properties. COLOURS: White, grey, tile red and black under order. It contains fibers. Prices according the volume of orders.

Aplication Elastomer putty with high adherence and elasticity?

For sealing joints whose permanent deformation is not over 10% of joint width (joint with few movement). For sealing in carpentry (aluminium, PVC, wood, etc). For sealing small cracks, plumbing, etc). Basically for interior joints with few movement. For sealing fissures in works of walls or facades repainting both for interiors and exteriors.

Features and Benefits de LASTOIS 10 , Elastomer putty with high adherence and elasticity

  •  EASE OF APPLYING
  •   HIGH ADHERENCE
  •   HIGH RESISTANCE
  •   PAINTABLE WITH PLASTIC PAINTS
  •   HIGH DURABILITY
  •   MODERATE MOVEMENT CAPACITY
  •   DECREASES THE MOSS FORMATION
  •   ANTICORROSIVE PROPERTIES
 COMPRAR

¡Compártelo o guárdalo!

Surface preparation

The surface must be quite clean, free of greases, oils, wastes of release-agents, cements, etc y being firm and compact.

Modes of application Elastomer putty with high adherence and elasticity?

 It is applied by silicon gun or spatula.
  It must be fitted into the joint, filling it all, avoiding the penetration of air and pressing by spatula.
  When the joints be very porous it must be slithtly moistened.
 If the joint is very deep a TEAIS JUPO joint base must be placed. - LASTOIS 10 isn´t suitable for metallic furfaces prone to corrosion, neither such as glass sealant, in pavements joints, in joints of sanitary fittings, on marble, natural stone or joints that will be immersed for all time. - It is required to be in contact with air to dry. - If it is neccesary big fillings must be done and these fillings must be done in several layers thus the dry capacity of putty decreases. - Resistant to alkaly splattering, oils, alcohols, etc. - It doesn´t drop (thixotropic) and can be applied even on surfaces slightly moistened (when it is drying). - It can be painted on, once it becomes cross-linked, it has high adherence on construction materials without forming lumps.

Clean up

With plenty of water and soap while it is not dry. If it is dry by mechanical means.

Performance Elastomer putty with high adherence and elasticity

12 m in joint of 5x5 mm

Storage Elastomer putty with high adherence and elasticity

1 year in their original packages and tightly closed. In stable environments and protected from the weather. Avoid notable changes of temperature.

Documentation Elastomer putty with high adherence and elasticity

Productos relacionadas

MÁXIMA CALIDAD.
En materias primas
y construcción.
FEDER INNTERCONECTA

2015-2017 SHIAC (ITC-20151250): DESARROLLO DE TECNOLOGÍAS DE HIGIENIZACIÓN PARA LA REDUCCIÓN DE RIESGOS BIOLÓGICOS EN ACUICULTURA
El proyecto SHIAC tiene como objetivo principal la investigación y desarrollo de una estrategia integral que permita reducir el riesgo biológico en acuicultura, integrando diferentes medidas tanto de tipo activo como pasivo para la prevención de patologías con una gran incidencia económica en el sector, y aportando soluciones más sostenibles ambientalmente a las actualmente empleadas en acuicultura.
Grupo Tres Mares S.A actúa como socio representante del consorcio empresarial que ejecuta este proyecto el cual ha sido aprobado y subvencionado por CDTI en el marco de la convocatoria FEDER INNTERCONECTA 2015.