Epoxy adhesive for carbon mesh bondings

EPOAIS CARBONO

¡Compártelo o guárdalo!

EPOAIS CARBONO , EPOXY ADHESIVE FOR CARBON MESH BONDINGS

EPOAIS CARBONO

EPOXY ADHESIVE FOR CARBON MESH BONDINGS

COMPRAR Ficha Técnica

Description Epoxy adhesive for carbon mesh bondings, EPOAIS CARBONO ?

EPOAIS CARBONO is an epoxi bicomponent adhesive specially made for fixing TEJIAIS CARBONO on structural reinforcement systems.

Aplication Epoxy adhesive for carbon mesh bondings?

Epoais Carbono is used to adhere Tejiais Carbon onto reinforced concrete structures, masonry, wood, in which is required a bearing capacity reinforcement.

Features and Benefits de EPOAIS CARBONO , Epoxy adhesive for carbon mesh bondings

  •   VERY GOOD ADHESION
  •   VERY GOOD WORKABILITY
  •   APPROPRIATED OPEN TIME
  •   HIGH MECANICAL STRENGTH
 COMPRAR

¡Compártelo o guárdalo!

Surface preparation

The surface must be clean and dry, free of dust and loose particles, and must be presented with good mechanical strength.

Modes of application Epoxy adhesive for carbon mesh bondings?

 Preparation of the support: - Clean mechanically by sandblasting or sanding, by eliminating any trace of dust, loose particles, releasing agents, or any other particle that may hinder proper adherence. - The minimum curing period of concrete is 28 days (less than 4% of humidity). - The cohesion of the support measured in terms of tear resistance is equal to or above 1 N/mm2. - For the reinforced structure edges, it is necessary to cover a minimum radius of at least 10 mm. - The maximum temperature is 50ºC. - When fixing the support, its temperature should be 3ºC above dew temperature. -Adhesive mixing: - A homogeneous blend of each component should be obtained separately. - The two components are then mixed. - The resulting adhesive is then applied to the support with paint brush or small brush according to the surface area to be covered. - The reinforcing fibre mesh TEJIAIS CARBONO is embeddes into the fresh sticking surface by carefully gathering the fibres in the required manner. (see the instructions on TEJIAIS CARBONO Technical Data Sheet).

Clean up

The tools are cleaned with Epoxi Dissolvent while the product is fresh.

Performance Epoxy adhesive for carbon mesh bondings

0.5 to 0.7 kg/m2 according to the type of support.

Storage Epoxy adhesive for carbon mesh bondings

1 years in their original packagings and properly closed.

Documentation Epoxy adhesive for carbon mesh bondings

+34 981 602 111
¿Tienes dudas?
Llámanos
MÁXIMA CALIDAD.
En materias primas
y construcción.
logo de teais, empresa de materiales de construcción
Avda. da Enerxía, nº 153, Pol. Ind. de Sabón
15143 Arteixo,A Coruña
Phone.: 981 602 111
Fax.: 981 601 508
Email.: desarrollo@teais.es

síguenos en:

Política de cookies | Aviso Legal | Política de privacidad

FEDER INNTERCONECTA

2015-2017 SHIAC (ITC-20151250): DESARROLLO DE TECNOLOGÍAS DE HIGIENIZACIÓN PARA LA REDUCCIÓN DE RIESGOS BIOLÓGICOS EN ACUICULTURA
El proyecto SHIAC tiene como objetivo principal la investigación y desarrollo de una estrategia integral que permita reducir el riesgo biológico en acuicultura, integrando diferentes medidas tanto de tipo activo como pasivo para la prevención de patologías con una gran incidencia económica en el sector, y aportando soluciones más sostenibles ambientalmente a las actualmente empleadas en acuicultura.
Grupo Tres Mares S.A actúa como socio representante del consorcio empresarial que ejecuta este proyecto el cual ha sido aprobado y subvencionado por CDTI en el marco de la convocatoria FEDER INNTERCONECTA 2015.