Polypropylene fibers for concretes and mortars

FIBRA DE POLIPROPILENO

¡Compártelo o guárdalo!

FIBRA DE POLIPROPILENO , POLYPROPYLENE FIBERS FOR CONCRETES AND MORTARS

FIBRA DE POLIPROPILENO

POLYPROPYLENE FIBERS FOR CONCRETES AND MORTARS

Description Polypropylene fibers for concretes and mortars, FIBRA DE POLIPROPILENO ?

FIBRA DE POLIPROPILENO is made of fibers to decrease the plastic contraction and cracks in mortars and concretes. FIBRA DE POLIPROPILENO is used as an additive to make industrial pavements, concrete-prefabs, renders, concretes and mortars with high resistance against impacts, concrete-pavements and printed concrete.

Aplication Polypropylene fibers for concretes and mortars?

It is used in mortars and concretes which the retraction must be controlled, to decrease the cracking and to improve mechanical resistance to impacts. It is used on industrial pavements, concrete-prefabs, renders, concrete slabs and concrete with impact resistance.

Features and Benefits de FIBRA DE POLIPROPILENO , Polypropylene fibers for concretes and mortars

  •  IT REDUCES CRACKING FOR RETRACTION
  •   INCREASES THE TOUGHNESS OF CONCRETE OR MORTAR
  •   INCREASES IMPACT RESISTANCE
 COMPRAR

¡Compártelo o guárdalo!

Surface preparation

It is no necessary.

Modes of application Polypropylene fibers for concretes and mortars?

 FIBRA DE POLIPROPILENO is added in the concrete-mixer when the mixture is about to be finisthed (It should be added when all materials are in concrete-mixer avoiding the addition if inside there is only water). -Once FIBRA DE POLIPROPILENO IS ADDED the mixture-time must be extended from 3 to 5 minutes. -The proper dose of FIBRA DE POLIPROPILENO is 600 grs per m3 of mortar or concrete.
 FIBRA DE POLIPROPILENO is suitable with other additives for concrete and mortars. -It not avoid cracks on concrete and its internal structure.

Clean up

With plenty clean water.

Performance Polypropylene fibers for concretes and mortars

600 grs/m3

Storage Polypropylene fibers for concretes and mortars

In their original packages and protected from the weather can be conserved by indefinite time.

Documentation Polypropylene fibers for concretes and mortars

Productos relacionadas

MÁXIMA CALIDAD.
En materias primas
y construcción.
FEDER INNTERCONECTA

2015-2017 SHIAC (ITC-20151250): DESARROLLO DE TECNOLOGÍAS DE HIGIENIZACIÓN PARA LA REDUCCIÓN DE RIESGOS BIOLÓGICOS EN ACUICULTURA
El proyecto SHIAC tiene como objetivo principal la investigación y desarrollo de una estrategia integral que permita reducir el riesgo biológico en acuicultura, integrando diferentes medidas tanto de tipo activo como pasivo para la prevención de patologías con una gran incidencia económica en el sector, y aportando soluciones más sostenibles ambientalmente a las actualmente empleadas en acuicultura.
Grupo Tres Mares S.A actúa como socio representante del consorcio empresarial que ejecuta este proyecto el cual ha sido aprobado y subvencionado por CDTI en el marco de la convocatoria FEDER INNTERCONECTA 2015.