Mortar for capillarity moisture sanitation

CAPILAIS N

¡Compártelo o guárdalo!

CAPILAIS N , MORTAR FOR CAPILLARITY MOISTURE SANITATION

CAPILAIS N

MORTAR FOR CAPILLARITY MOISTURE SANITATION

Description Mortar for capillarity moisture sanitation, CAPILAIS N ?

Special mortar for the cleaned of the facade or wall afected by rising capillary damp. Before applying the CAPILAISN mortar TEAIS CAPI C must be injected in order to reduce as possible the capillary on the fancings. Indoors are cladding with PERLAIS M or PERLAIS E and outdoors with REPOIS M o REPOIS R. White colour.

Aplication Mortar for capillarity moisture sanitation?

It is used for cleaning walls and facades affected by rising dampness.

Features and Benefits de CAPILAIS N , Mortar for capillarity moisture sanitation

  •  IT ENSURES QUICK EVAPORATION
  •   APPROPRIATE DECORATIVE FINISH
  •  EXCELLENT RESISTANCE
 COMPRAR

¡Compártelo o guárdalo!

Surface preparation

The background of application must be free of grease, oil, dust or paint. Any previous covering, if any, must be removed until the support is compact and stable. Dampen the support before the application of CAPILAIS. .

Modes of application Mortar for capillarity moisture sanitation?

  Mix with 25% of water approximately (25 litres of water for every 100 kg of product). Leave to stand for 5 to 10 minutes. Then apply in a thickness of 10 to 15 mm and never smoothen with a trowel. Finally leave to dry for 1 to 7 days depending on room temperature. - In interiors, PERLAIS-E are used. In exteriors, PINSIL D.
  If humidities capillarity prior application of a system of injections to cut rising damp, as the Teais Capi C system that allows efficient lock moisture wicking, and then if you will need can end the Capilais mortar.

Clean up

Clean using large amounts of water.

Performance Mortar for capillarity moisture sanitation

20 kg per sqm in 2 mm thick layer.

Storage Mortar for capillarity moisture sanitation

It is recommended to store this product for 2 years in its tightly closed original packages, kept away from humidity.

Documentation Mortar for capillarity moisture sanitation

Productos relacionadas

MÁXIMA CALIDAD.
En materias primas
y construcción.
FEDER INNTERCONECTA

2015-2017 SHIAC (ITC-20151250): DESARROLLO DE TECNOLOGÍAS DE HIGIENIZACIÓN PARA LA REDUCCIÓN DE RIESGOS BIOLÓGICOS EN ACUICULTURA
El proyecto SHIAC tiene como objetivo principal la investigación y desarrollo de una estrategia integral que permita reducir el riesgo biológico en acuicultura, integrando diferentes medidas tanto de tipo activo como pasivo para la prevención de patologías con una gran incidencia económica en el sector, y aportando soluciones más sostenibles ambientalmente a las actualmente empleadas en acuicultura.
Grupo Tres Mares S.A actúa como socio representante del consorcio empresarial que ejecuta este proyecto el cual ha sido aprobado y subvencionado por CDTI en el marco de la convocatoria FEDER INNTERCONECTA 2015.