Curing lacquer for mortars and concretes

LACURIS D

¡Compártelo o guárdalo!

LACURIS D , CURING LACQUER FOR MORTARS AND CONCRETES

LACURIS D

CURING LACQUER FOR MORTARS AND CONCRETES

Description Curing lacquer for mortars and concretes, LACURIS D ?

Transparent liquid based in sintetic resins diluted in solvents in order to act as a curated protective lining on concretes and fresh mortar.

Aplication Curing lacquer for mortars and concretes?

It's sprayed onto mortar or concrete surfaces, mainly in summer time or high temperatures to prevent premature water evaporation and allowing an appropriated setting. Very suitable for concrete highways and roads, airport runways, industrial pavements, precast elements, canals, etc.

Features and Benefits de LACURIS D , Curing lacquer for mortars and concretes

  •   AVOID DEHYDRATION OF MORTAR AND CONCRETE
  •   REDUCES CONTRACTION CRACKS
  •   ENSURES THE OBTENTION OF THE INTENDED RESISTANCES
 COMPRAR

¡Compártelo o guárdalo!

Surface preparation

Not applicable.

Modes of application Curing lacquer for mortars and concretes?

 Homogenizing properly the product before applicating. -Applying directly on the fresh mortar or concrete by a spray pistol. -The application must be done once the superficial water dissipate from the concrete or mortar. -The surfaces which will be coating after must be sanded in order to disposal the remains of the product.

Clean up

With our solvent DISOLUAIS

Performance Curing lacquer for mortars and concretes

8 sqm per litre (minimum).

Storage Curing lacquer for mortars and concretes

2 years, in their original packagings, properly closed and at moderated temperatures, stored in a cool and dry place.

Documentation Curing lacquer for mortars and concretes

Productos relacionadas

MÁXIMA CALIDAD.
En materias primas
y construcción.
FEDER INNTERCONECTA

2015-2017 SHIAC (ITC-20151250): DESARROLLO DE TECNOLOGÍAS DE HIGIENIZACIÓN PARA LA REDUCCIÓN DE RIESGOS BIOLÓGICOS EN ACUICULTURA
El proyecto SHIAC tiene como objetivo principal la investigación y desarrollo de una estrategia integral que permita reducir el riesgo biológico en acuicultura, integrando diferentes medidas tanto de tipo activo como pasivo para la prevención de patologías con una gran incidencia económica en el sector, y aportando soluciones más sostenibles ambientalmente a las actualmente empleadas en acuicultura.
Grupo Tres Mares S.A actúa como socio representante del consorcio empresarial que ejecuta este proyecto el cual ha sido aprobado y subvencionado por CDTI en el marco de la convocatoria FEDER INNTERCONECTA 2015.