Silicate-based paint.

PINSIL D

¡Compártelo o guárdalo!

PINSIL D , SILICATE-BASED PAINT.

PINSIL D

SILICATE-BASED PAINT.

Description Silicate-based paint., PINSIL D ?

Paint based on silicate with inorganic pigments and mineral substances for filling completely resistant to light. Ideal paint to renders based on cement mortars, faced concrete, natural or artificial stone, etc, All of them under direct sunlight. In addition, it has fungicide properties, slimicides, algaecide and against moss. White colour. Other colours available under order.

Aplication Silicate-based paint.?

On facades, backs of building, partition walls, balconies, turrets, domes, baseboards, etc. On new or old renders as based cement as lime based, on concretes, natural or artificial stone, fibercement, etc. Supports that must have theirs pores open to apply the paint. Is very suitable to refurbishment due doesn´t form barrier, let transpire the enclosure, has high durability, is quite resistant to light and UV radiation, has biocide effect due its high PH. It repelets dirty. It neither cracks nor flakes. It neither form pockets nor swell by moisture effect.

Features and Benefits de PINSIL D , Silicate-based paint.

  •  HIGH DURABILITY
  •   EXCELLENT PERFORMANCE TO THE WEATHER
  •   RESISTANT TO AGEING
  •   TRANSPIRABLE
  •   RESISTANT TO U.V.
  •   FIREPROOFING
  •   BIOCIDE EFFECT
 COMPRAR

¡Compártelo o guárdalo!

Surface preparation

The surface must be quite clean, free of greases, loose parts being compact and perfectly dry. It must be free of organic paints. On gypsum or plaster supports or others of acid nature mustn´t be applied without a previous treatment.

Modes of application Silicate-based paint.?

 Homogenize very well the content of the package. - PINSIL D can be applied on all mineral surfaces. The old paints that forms a film and increases the difficulty to the vapour dissemination must be removed. - PINSIL D can be applied on mineral supports with open pore such as mortars, stone imitation mortars, natural or artificial stone, concrete, fibercement. - Because its excellent adherence also can be applied on galvanized iron or aluminium. If an application on gypsum or plaster or acid nature supports a previous treatment on the surface must be done.
  Apply by brush or roller.
  Apply directly two coats minimun.
  24 hours must be spent between coats.
  The application of thin coats increases the quality and decreases the paint consumption. Don´t dilute with water. Don´t paint under direct sunlight, with temperatures below of 5ºC, rain, freeze, strong wind or any adverse weather condition. - PINSIL D has high resistance to light and UV radiation. Once it dries does not form a film but on mineral supports suffer a mineralization process with the support called "silification". - It has a high permeability to water vapour and is impermeable to water but does not resist the wet rub until complete the "silicification" process that last 30 days approximately. - Because its high PH has properties against the formation of moss. It is a fireproof paint. - It neither cracks nor flakes and not forms pockets by the moisture effect.

Clean up

with plenty of clean water while the paint is wet.

Performance Silicate-based paint.

3 sqm per litre.

Storage Silicate-based paint.

1 year in their original packages, tightly closed at temperatures up from 5ºC, protected from the weather and weather changes.

Documentation Silicate-based paint.

Productos relacionadas

MÁXIMA CALIDAD.
En materias primas
y construcción.
FEDER INNTERCONECTA

2015-2017 SHIAC (ITC-20151250): DESARROLLO DE TECNOLOGÍAS DE HIGIENIZACIÓN PARA LA REDUCCIÓN DE RIESGOS BIOLÓGICOS EN ACUICULTURA
El proyecto SHIAC tiene como objetivo principal la investigación y desarrollo de una estrategia integral que permita reducir el riesgo biológico en acuicultura, integrando diferentes medidas tanto de tipo activo como pasivo para la prevención de patologías con una gran incidencia económica en el sector, y aportando soluciones más sostenibles ambientalmente a las actualmente empleadas en acuicultura.
Grupo Tres Mares S.A actúa como socio representante del consorcio empresarial que ejecuta este proyecto el cual ha sido aprobado y subvencionado por CDTI en el marco de la convocatoria FEDER INNTERCONECTA 2015.