Special adhesive for ceramics and stone

ADLOIS F

¡Compártelo o guárdalo!

ADLOIS F , SPECIAL ADHESIVE FOR CERAMICS AND STONE

ADLOIS F

SPECIAL ADHESIVE FOR CERAMICS AND STONE

Description Special adhesive for ceramics and stone, ADLOIS F ?

Dust adhesive that mixed with AGLUTAIS 30 - 50 makes it in a ideal adhesive for sitting marble, granite and stone on regularized supports. Available colours: White or grey.

Aplication Special adhesive for ceramics and stone?

ADLOIS F is used as an adhesive in the stone fixed elements and for placing ceramics pieces in top of each other.

Features and Benefits de ADLOIS F , Special adhesive for ceramics and stone

  •  EXCELLENT ADHERENCE CAPACITY
  •  GREAT MECHANICAL RESISTANCE
  •   VERY GOOD WORKABILITY

¡Compártelo o guárdalo!

Surface preparation

The surface which the product is going to be applyed must be cleaned, dust free and free particles. Must be strong and porous. The support must be slaightly moistened before applying.

Modes of application Special adhesive for ceramics and stone?

 Adois F is mixed in this proportions: -Mix ADLOIS F and AGLUTAIS 30-50 in this way: 25 kgs of ADOIS with 4 litres of AGLUTAIS 30-50 until obteining a homogenize and consinstent paste.
  The product mix is realized manually or with a low speed electric mixer (400-500 rpm). -In summer time with hot weather, don´t spread more material than it could be covered in 10 minutes. The product can be open more time when more cold the weather is. In winter time the open-time can be of 20 minutes.
 Apply by thooted trowel in thickness about 2-5 mm.

Clean up

With a lot of water while the material is still fresh. The hardened material only can be removed by mechanical means.

Performance Special adhesive for ceramics and stone

3 kg per sqm by 2 mm layer.

Storage Special adhesive for ceramics and stone

2 years in they sacks and original containers. Well closed and keep in dry and open-air environments.

Documentation Special adhesive for ceramics and stone

Productos relacionadas

MÁXIMA CALIDAD.
En materias primas
y construcción.
FEDER INNTERCONECTA

2015-2017 SHIAC (ITC-20151250): DESARROLLO DE TECNOLOGÍAS DE HIGIENIZACIÓN PARA LA REDUCCIÓN DE RIESGOS BIOLÓGICOS EN ACUICULTURA
El proyecto SHIAC tiene como objetivo principal la investigación y desarrollo de una estrategia integral que permita reducir el riesgo biológico en acuicultura, integrando diferentes medidas tanto de tipo activo como pasivo para la prevención de patologías con una gran incidencia económica en el sector, y aportando soluciones más sostenibles ambientalmente a las actualmente empleadas en acuicultura.
Grupo Tres Mares S.A actúa como socio representante del consorcio empresarial que ejecuta este proyecto el cual ha sido aprobado y subvencionado por CDTI en el marco de la convocatoria FEDER INNTERCONECTA 2015.