Adhesive for laying stone slabs - thick coating type

ADHPI GRUESO

¡Compártelo o guárdalo!

ADHPI GRUESO, ADHESIVE FOR LAYING STONE SLABS - THICK COATING TYPE

ADHPI GRUESO

ADHESIVE FOR LAYING STONE SLABS - THICK COATING TYPE

OTRAS VARIANTES DE ADHPI :

FINO

Description Adhesive for laying stone slabs - thick coating type, ADHPI GRUESO?

Powder adhesive for placing stone slabs on floors, walls, facades. ADHPI is an intermediate solution between cement-based adhesives and ADLOIS. It is considerably better than average glue cements, with faster setting, higher mechanical resistance and greater waterproofing properties. It also reduces the risk of damp patches and efflorescence. (C2 T E S1)

Aplication Adhesive for laying stone slabs - thick coating type?

It is an adhesive used for joining marble and granite pieces, used in floor paving, vertical supports such as granite attachments, polished marble attachments, baseboards, plinths, door and window frameworks, rise and fall of stairs, and stone-like masonry.

Features and Benefits de ADHPI GRUESO, Adhesive for laying stone slabs - thick coating type

  •  EXCELLENT ADHERENCE. IMPROVED WORKABILITY.ENHANCED WATERPROOFING PROPERTIES.
 COMPRAR

¡Compártelo o guárdalo!

Surface preparation

Apply to clean, sound and damp surfaces with no trace of loose parts, grease and releasing agent residues.

Modes of application Adhesive for laying stone slabs - thick coating type?

  ADHPI is a powder glue for mixing with water. The proportion of the mix is 4,5 L of water per 25 kg of product. (when mixed with water, it becomes an easily trowelable mortar with good bonding strength, low slump and high initial grab, or vertical application without any sagging or slipping) - It can be mixed manually or using a low speed electric mixer (400-500 rpm).
  It can then be applied by trowel so as to reach 1 to 2 cm thick layer according to the desired application.
  Once the adhesive is uniformly spread, proceed to placing stone slabs onto the treated support in a time interval of 10 minutes (for high temperatures in the summertime) and 20 minutes (for mild winter temperatures). - For this procedure, double adhesive coating is required by buttering the piece to be glued and applying another layer to the support(set stone slabs before the skinning process occurs. If it takes place, scrape off and replace with fresh mortar).

Clean up

It is recommended to clean with water the material whilst it is still fresh. Once hard, use mechanical means.

Performance Adhesive for laying stone slabs - thick coating type

1.5 kg/m2 for 1 mm thick layers.

Storage Adhesive for laying stone slabs - thick coating type

It is recommended to store this product for 2 years in tightly closed original damp proof packages in a dry ventilated place under mild temperatures.

Documentation Adhesive for laying stone slabs - thick coating type

Productos relacionadas

MÁXIMA CALIDAD.
En materias primas
y construcción.
FEDER INNTERCONECTA

2015-2017 SHIAC (ITC-20151250): DESARROLLO DE TECNOLOGÍAS DE HIGIENIZACIÓN PARA LA REDUCCIÓN DE RIESGOS BIOLÓGICOS EN ACUICULTURA
El proyecto SHIAC tiene como objetivo principal la investigación y desarrollo de una estrategia integral que permita reducir el riesgo biológico en acuicultura, integrando diferentes medidas tanto de tipo activo como pasivo para la prevención de patologías con una gran incidencia económica en el sector, y aportando soluciones más sostenibles ambientalmente a las actualmente empleadas en acuicultura.
Grupo Tres Mares S.A actúa como socio representante del consorcio empresarial que ejecuta este proyecto el cual ha sido aprobado y subvencionado por CDTI en el marco de la convocatoria FEDER INNTERCONECTA 2015.