Fluid micro-concrete without retraction for works that requires high resistances.

HORMIGROUT

¡Compártelo o guárdalo!

HORMIGROUT , FLUID MICRO-CONCRETE WITHOUT RETRACTION FOR WORKS THAT REQUIRES HIGH RESISTANCES.

HORMIGROUT

FLUID MICRO-CONCRETE WITHOUT RETRACTION FOR WORKS THAT REQUIRES HIGH RESISTANCES.

COMPRAR Ficha Técnica

Description Fluid micro-concrete without retraction for works that requires high resistances., HORMIGROUT ?

Fluid consistence of micro-concrete, high mechanical resistance, specially designed for placing supports and machines, fillings by pouring, anchorages of metallic elements, filling of cracks and hollows into the mass of concrete. It has a particle size that allows the filling of volume.

Aplication Fluid micro-concrete without retraction for works that requires high resistances.?

HORMIGROUT is suitable for machines anchoring, levelling of machine platforms, support of bridges and cranes, filling by pouring under support plates, elements of metallic anchorages, filling of cracks and cavities into the concrete masses.Allows application thicknesses up to 8 cm.

Features and Benefits de HORMIGROUT , Fluid micro-concrete without retraction for works that requires high resistances.

  •  WITHOUT RETRACTION AND WITH MILD EXPANSION
  •   GOOD MECHANICAL RESISTANCE
  •   SELF-LEVELLING
 COMPRAR

¡Compártelo o guárdalo!

Surface preparation

The surface of application must to be cleaned, free of dust and loose particles, firm and slightly wet. The cleaning of the support is better done mechanically. The metallic parts must be free of oxide.

Modes of application Fluid micro-concrete without retraction for works that requires high resistances.?

 Amassed with water in the proportion of 2,75 litres per 25 kg sack. -The mixture is done manually or with a low revolution electric mixer (300/500 rmp). If the mixture is done manually the mixture-time must be done 5 minutes more. -The micro-concrete must be used inmediatly in order to achieve all of its expansive effect and fluency. - Avoid its applying with freeze, low temperatures, snow, etc… -Firstly It is recommended to wet the support on the product must be applied.The surface must be wet but no waterlogged. The best way to use the product is to pour the product when the moisture begins to decrease. -It is neccesary a suitable curing of the product, irrigating it since it is hardened and keeping it wet almost for 72 hours.

Clean up

The cleaning of the tools must be done plenty of water while the material is wet.

Performance Fluid micro-concrete without retraction for works that requires high resistances.

21 kg per sqm and centimeter of thickness

Storage Fluid micro-concrete without retraction for works that requires high resistances.

Two years in their original packages keeping it away from the weather stored in cool and dry places.

Documentation Fluid micro-concrete without retraction for works that requires high resistances.

Productos relacionadas

HORMIFLUIS, FLUID MICRO-CONCRETE WITHOUT RETRACTION

HORMIFLUIS

FLUID MICRO-CONCRETE WITHOUT RETRACTION

COMPRARMÁS INFO
HORMITIX, THIXOTROPIC MICRO-CONCRETE WITHOUT RETRACTION.

HORMITIX

THIXOTROPIC MICRO-CONCRETE WITHOUT RETRACTION.

COMPRARMÁS INFO
+34 981 602 111
¿Tienes dudas?
Llámanos
MÁXIMA CALIDAD.
En materias primas
y construcción.
logo de teais, empresa de materiales de construcción
Avda. da Enerxía, nº 153, Pol. Ind. de Sabón
15143 Arteixo,A Coruña
Phone.: 981 602 111
Fax.: 981 601 508
Email.: desarrollo@teais.es

síguenos en:

Política de cookies | Aviso Legal | Política de privacidad

FEDER INNTERCONECTA

2015-2017 SHIAC (ITC-20151250): DESARROLLO DE TECNOLOGÍAS DE HIGIENIZACIÓN PARA LA REDUCCIÓN DE RIESGOS BIOLÓGICOS EN ACUICULTURA
El proyecto SHIAC tiene como objetivo principal la investigación y desarrollo de una estrategia integral que permita reducir el riesgo biológico en acuicultura, integrando diferentes medidas tanto de tipo activo como pasivo para la prevención de patologías con una gran incidencia económica en el sector, y aportando soluciones más sostenibles ambientalmente a las actualmente empleadas en acuicultura.
Grupo Tres Mares S.A actúa como socio representante del consorcio empresarial que ejecuta este proyecto el cual ha sido aprobado y subvencionado por CDTI en el marco de la convocatoria FEDER INNTERCONECTA 2015.