Protector for ceramic paving

PROTICER

¡Compártelo o guárdalo!

PROTICER , PROTECTOR FOR CERAMIC PAVING

PROTICER

PROTECTOR FOR CERAMIC PAVING

Description Protector for ceramic paving, PROTICER ?

PROTICER is a protector for ceramic floors. Applies before grouting and avoids stains on the ceramic and remains as a ceramic protector.

Aplication Protector for ceramic paving?

Porticer is applied to facilitate the cleaning of the tiles after grouting. The product remains as a protection on the tiles, giving a satin look.

Features and Benefits de PROTICER , Protector for ceramic paving

  •   EASY TO APPLY
  •   MAKES EASY CLEANING OF THE GROUT
  •   REMAIN AS A PROTECTION AFTER CLEANING
  •   SLIGHTLY SATIN SURFACE EFFECT
 COMPRAR

¡Compártelo o guárdalo!

Surface preparation

The surface of application of the tiles must be clean and dry, free of dust or loose particles.

Modes of application Protector for ceramic paving?

  Shake to homogenize well the contents of the package. - PROTICER is applied using a paint brush, gun or spray in the recommended coverage of 4-5 m2/l approximately. - The surface of application must be clean and dry.
  In case of more absorbent areas than others, repeat the application , to obtain a homogeneous surface. - Apply before grouting and leave to dry completely. Apply without diluting. -While the grouting is done, the surface is cleaned and finally the cleaning of the entire surface is finished.

Clean up

The tools used will be cleaned with Disoluais N.

Performance Protector for ceramic paving

4-5 m2 per l.

Storage Protector for ceramic paving

Two years in its original containers protected from the elements, without sudden changes of temperature.

Documentation Protector for ceramic paving

Productos relacionadas

MÁXIMA CALIDAD.
En materias primas
y construcción.
FEDER INNTERCONECTA

2015-2017 SHIAC (ITC-20151250): DESARROLLO DE TECNOLOGÍAS DE HIGIENIZACIÓN PARA LA REDUCCIÓN DE RIESGOS BIOLÓGICOS EN ACUICULTURA
El proyecto SHIAC tiene como objetivo principal la investigación y desarrollo de una estrategia integral que permita reducir el riesgo biológico en acuicultura, integrando diferentes medidas tanto de tipo activo como pasivo para la prevención de patologías con una gran incidencia económica en el sector, y aportando soluciones más sostenibles ambientalmente a las actualmente empleadas en acuicultura.
Grupo Tres Mares S.A actúa como socio representante del consorcio empresarial que ejecuta este proyecto el cual ha sido aprobado y subvencionado por CDTI en el marco de la convocatoria FEDER INNTERCONECTA 2015.