Fast-dry antirust primer.

IMPRIMAIS MR

¡Compártelo o guárdalo!

IMPRIMAIS MR , FAST-DRY ANTIRUST PRIMER.

IMPRIMAIS MR

FAST-DRY ANTIRUST PRIMER.

Description Fast-dry antirust primer., IMPRIMAIS MR ?

Fast dry time antirust primer for protecting metallic surfaces. Solvent: DISOLUAIS. Colours: Red, Grey and Black.

Aplication Fast-dry antirust primer.?

As a primer and protection of car bodies, truck cabins, vans, bikes, metallic structures, etc

Features and Benefits de IMPRIMAIS MR , Fast-dry antirust primer.

  •  ANTIRUST PRIMER
  •   FAST DRY TIME
  •   HIGH ADHERENCE
  •   HIGH DURABILITY
 COMPRAR

¡Compártelo o guárdalo!

Surface preparation

The surface must be clean, free of dust, greases, oils and other polluting agents that avoids a good adherence on the supports and a perfect finish.

Modes of application Fast-dry antirust primer.?

  Shake well the content of the package before using.
  Once the surface iscleaning up, dry and free of rust, prime with diluted layer from 10% to 30% with DISOLUAIS by spray gun.
  Allow 30 minutes (minimum) and apply a second layer by the same way. - Allow it dry at least 8 hours at 20ºC for applying the finishing.
  Protect with a finish based on synthethic enamels ESMAIS AND ESMAR.

Clean up

With grease- based solvent DISOLUAIS.

Performance Fast-dry antirust primer.

5 sqm per litre.

Storage Fast-dry antirust primer.

2 years in their original packages and tightly closed, stored in a dry and cool place and protected from the weaher.

Documentation Fast-dry antirust primer.

Productos relacionadas

MÁXIMA CALIDAD.
En materias primas
y construcción.
FEDER INNTERCONECTA

2015-2017 SHIAC (ITC-20151250): DESARROLLO DE TECNOLOGÍAS DE HIGIENIZACIÓN PARA LA REDUCCIÓN DE RIESGOS BIOLÓGICOS EN ACUICULTURA
El proyecto SHIAC tiene como objetivo principal la investigación y desarrollo de una estrategia integral que permita reducir el riesgo biológico en acuicultura, integrando diferentes medidas tanto de tipo activo como pasivo para la prevención de patologías con una gran incidencia económica en el sector, y aportando soluciones más sostenibles ambientalmente a las actualmente empleadas en acuicultura.
Grupo Tres Mares S.A actúa como socio representante del consorcio empresarial que ejecuta este proyecto el cual ha sido aprobado y subvencionado por CDTI en el marco de la convocatoria FEDER INNTERCONECTA 2015.