Finish resin for stamp concrete floors

RESIMPRES A

¡Compártelo o guárdalo!

RESIMPRES A, FINISH RESIN FOR STAMP CONCRETE FLOORS

RESIMPRES A

FINISH RESIN FOR STAMP CONCRETE FLOORS

COMPRAR Ficha Técnica

OTRAS VARIANTES DE RESIMPRES :

D

Description Finish resin for stamp concrete floors, RESIMPRES A?

Resin finishing concrete printed PAVIMPRES pavements , which grants them very decorative satin finish. colorless

Aplication Finish resin for stamp concrete floors?

As a finishing resin on concrete and printed concrete pavements that provides them a satin finish, frost protection , improves durability, prevents absorption of stains, homogenizes and revives appearance.

Features and Benefits de RESIMPRES A, Finish resin for stamp concrete floors

  •   PROVIDES A VERY GOOD PROTECTION
  •   HOMOGENISES APPEARANCE
  •   LIFE EXTENSION
 COMPRAR

¡Compártelo o guárdalo!

Surface preparation

Must be clean, without grease, dust, loose parts, appearing compact and perfectly dry.

Modes of application Finish resin for stamp concrete floors?

 Shaking the product in order to homogenize it.
 The product must be applied by brush, roller or spray pistol. -The surface of the appliation must be cleaned, cleaned and dry, free of dust and loose particles.
 RESIMPRES is applied directy on the pavimente for protecting, applicating one single hand and spreading properly the product. If two hands must be applying the second one will be apply after the first one becomes dry.
 It is applied directly, undiluted. -Is very important that the concrete doesn´t have moisture in order to avoid the bleach of the product. -Not apply with high temperatures., if it is going to rain, with strong wind or with frosts.

Clean up

With plentiful clean water.

Performance Finish resin for stamp concrete floors

8 sqm per litre

Storage Finish resin for stamp concrete floors

2 years, in their original packagings and properly closed, at a temperature not lower than 5 ° C, protected from the weather.

Documentation Finish resin for stamp concrete floors

Productos relacionadas

PAVILAC, Coating based on polyurethane for protecting and refurbishing synthetic floorings.

PAVILAC

Coating based on polyurethane for protecting and refurbishing synthetic floorings.

COMPRARMÁS INFO
PROTECTOR TEAIS-MICROCEMENTO, SPECIAL PROTECTOR FOR THIN PORE SURFACES

PROTECTOR TEAIS-MICROCEMENTO

SPECIAL PROTECTOR FOR THIN PORE SURFACES

COMPRARMÁS INFO
PROTICER, PROTECTOR FOR CERAMIC PAVING

PROTICER

PROTECTOR FOR CERAMIC PAVING

COMPRARMÁS INFO
SEPA,

SEPA

MÁS INFO
TEAIS PAVIFORTE, Hardening liquid treatment and consolidating.

TEAIS PAVIFORTE

Hardening liquid treatment and consolidating.

MÁS INFO
+34 981 602 111
¿Tienes dudas?
Llámanos
MÁXIMA CALIDAD.
En materias primas
y construcción.
logo de teais, empresa de materiales de construcción
Avda. da Enerxía, nº 153, Pol. Ind. de Sabón
15143 Arteixo,A Coruña
Phone.: 981 602 111
Fax.: 981 601 508
Email.: desarrollo@teais.es

síguenos en:

Política de cookies | Aviso Legal | Política de privacidad

FEDER INNTERCONECTA

2015-2017 SHIAC (ITC-20151250): DESARROLLO DE TECNOLOGÍAS DE HIGIENIZACIÓN PARA LA REDUCCIÓN DE RIESGOS BIOLÓGICOS EN ACUICULTURA
El proyecto SHIAC tiene como objetivo principal la investigación y desarrollo de una estrategia integral que permita reducir el riesgo biológico en acuicultura, integrando diferentes medidas tanto de tipo activo como pasivo para la prevención de patologías con una gran incidencia económica en el sector, y aportando soluciones más sostenibles ambientalmente a las actualmente empleadas en acuicultura.
Grupo Tres Mares S.A actúa como socio representante del consorcio empresarial que ejecuta este proyecto el cual ha sido aprobado y subvencionado por CDTI en el marco de la convocatoria FEDER INNTERCONECTA 2015.