Antirust enamel protector.

PINTOX

¡Compártelo o guárdalo!

PINTOX , ANTIRUST ENAMEL PROTECTOR.

PINTOX

ANTIRUST ENAMEL PROTECTOR.

Description Antirust enamel protector., PINTOX ?

PINTOX is a paint applyied directly on metallic surfaces even having rust (ferrous metals) without primer. PINTOX can be applied on new or old metal as well as painted metal and also directly on rust. Only is required to remove rust or paint loose particles using a metallic brush.

Aplication Antirust enamel protector.?

Painting on metallic surfaces, iron or steel (ferrous metals) where a primer is not required and repainting on rusted metallic surfaces removing just rust loose particles.

Features and Benefits de PINTOX , Antirust enamel protector.

  •   SAVING IN CLEANING AND PREPAIRING TIME
  •   HIGH RESISTANCE AND DURABILITY
 COMPRAR

¡Compártelo o guárdalo!

Surface preparation

The surface must be free of greases, oils or substances that decreases the adherence. Remove coat and loose rusted particles.

Modes of application Antirust enamel protector.?

  Remove the content of the package to homogenize the product. - Apply by brush or roller on the cleaned support. - Apply two or three coats letting dry between them. - Thick coats mustn´t be applied because it takes longer dry causing film alterations. - On iron or steel PINTOX application can be done without a previous application of an antioxidant primer. On non-ferrous metals an adherence improver must be applied.

Clean up

The tools must be cleaned with TEAIS solvent DISOLUAIS N

Performance Antirust enamel protector.

From 4 to 5 sqm per litre

Storage Antirust enamel protector.

Two years in their original packages tightly closed protected from the weather and stored in cool and dry place.

Documentation Antirust enamel protector.

Productos relacionadas

MÁXIMA CALIDAD.
En materias primas
y construcción.
FEDER INNTERCONECTA

2015-2017 SHIAC (ITC-20151250): DESARROLLO DE TECNOLOGÍAS DE HIGIENIZACIÓN PARA LA REDUCCIÓN DE RIESGOS BIOLÓGICOS EN ACUICULTURA
El proyecto SHIAC tiene como objetivo principal la investigación y desarrollo de una estrategia integral que permita reducir el riesgo biológico en acuicultura, integrando diferentes medidas tanto de tipo activo como pasivo para la prevención de patologías con una gran incidencia económica en el sector, y aportando soluciones más sostenibles ambientalmente a las actualmente empleadas en acuicultura.
Grupo Tres Mares S.A actúa como socio representante del consorcio empresarial que ejecuta este proyecto el cual ha sido aprobado y subvencionado por CDTI en el marco de la convocatoria FEDER INNTERCONECTA 2015.